Not equal to, comparison of two signals !=~ outputs a 1 signal when the left input is not-equal to the right input and a 0 when it is equal to the right input. The right input can be a signal or a float. Cycling '74 MSP (signal) This != Right Inlet TEXT_HERE (signal/float) Left Inlet != This TEXT_HERE (signal) Comparison Result (1 or 0) TEXT_HERE Initial comparison value Sets an initial comparison value for the signal coming into the left inlet. 1 is sent out if the signal is not equal to the argument; otherwise, 0 is sent out. If a signal is connected to the right inlet, the argument is ignored. If no argument is present, and no signal is connected to the right inlet, the initial value is 0 by default. Set the comparison value In right inlet: A number to be used for comparison with the signal coming into the left inlet. If a signal is also connected to the right inlet, a float or int is ignored. Set the comparison value In right inlet: A number to be used for comparison with the signal coming into the left inlet. If a signal is also connected to the right inlet, a float or int is ignored. Function depends on inlet In left inlet: The signal is compared to a signal coming into the right inlet, or a constant value received in the right inlet. If it is not-equal to the value in the right inlet, 1 is sent out; otherwise, 0 is sent out.

In right inlet: The signal is used for comparison with the signal coming into the left inlet. If the signal in the left inlet is not equal to the value in the right inlet, 1 is sent out; otherwise, 0 is sent out.