Is less than, comparison of two signals <~ outputs a 1 signal when the left input is less-than the right input and a 0 when it is greater-than or equal-to the right input. The right input can be a signal or a float. Cycling '74 MSP (signal) This < Right Inlet TEXT_HERE (signal/float) Left Inlet < This TEXT_HERE (signal) Comparison Result (1 or 0) TEXT_HERE Comparison value Sets an initial comparison value for the signal coming into the left inlet. 1 is sent out if the signal is less than the argument; otherwise, 0 is sent out. If a signal is connected to the right inlet, the argument is ignored. If no argument is present, and no signal is connected to the right inlet, the initial value is 0 by default. Compare value with left input signal In right inlet: A number to be used for comparison with the signal coming into the left inlet. If a signal is also connected to the right inlet, a float or int is ignored. Compare value with left input signal In right inlet: A number to be used for comparison with the signal coming into the left inlet. If a signal is also connected to the right inlet, a float or int is ignored. Function depends on inlet In left inlet: The signal is compared to a signal coming into the right inlet, or a constant value received in the right inlet. If it is less than the value in the right inlet, 1 is sent out; otherwise, 0 is sent out.

In right inlet: The signal is used for comparison with the signal coming into the left inlet. If the signal in the left inlet is less than the value in the right inlet, 1 is sent out; otherwise, 0 is sent out.