Select output from two inlets Cycling '74 Max U/I Control Inlet (0=Left, 1=Right) TEXT_HERE Left Data Inlet TEXT_HERE Right Data Inlet TEXT_HERE Output of Selected Inlet TEXT_HERE TEXT_HERE TEXT_HERE Switch the current inlet In left inlet: Causes the connection to be made to the other inlet. Select an inlet In left inlet: The number specifies which one of the other inlets is to be open. 0 specifies the middle inlet, any number other than 0 specifies the right inlet. The gswitch icon shows the open inlet. Select an inlet In left inlet: Converted to int. TEXT_HERE TEXT_HERE TEXT_HERE TEXT_HERE Switch the current inlet Clicking on gswitch causes the connection to be made to the other inlet. Background Color Sets the outline color of the gswitch object in RGBA format. Selected position color Sets the color of the gswitch pathway in RGBA format. Number of Inputs TEXT_HERE Current inlet Specifies which one of the other two inlets is to be open. The default is 0 (middle inlet). Enable parameter mode handling Enables use of this object with Max for Live Parameters and allows for setting initial parameter values in the Max environment. Style Sets the style to be applied to the object. Styles can be set using the Format palette. Switch Contacts Color TEXT_HERE Pass the input out one of two outlets If the number in the left inlet is 0, all messages received in the middle inlet are passed out the outlet, and messages received in the right inlet are ignored. If the number in the left inlet is not 0, messages received in the middle inlet are ignored, and all messages received in the right inlet are passed out the outlet.