Decibel volume slider and monitor live.gain~ is a slider that scales input audio signals and provides a visual indication of the current sound level on a deciBel scale. Cycling '74 Live M4L U/I Audio Signal to be Scaled (ch 1), (Int/Float) Parameter Value (-70.00-6.00) TEXT_HERE Audio Signal to be Scaled (ch 2) TEXT_HERE Scaled Signal (ch 1) TEXT_HERE Scaled Signal (ch 2) TEXT_HERE Parameter Value (-70.00-6.00) TEXT_HERE Parameter Raw Value (0.-1.) TEXT_HERE Amplitude of Both Channels (in dB) TEXT_HERE TEXT_HERE TEXT_HERE Send the current value out the outlet Sends the current value out the outlet. Set the level (in dB) The number received in the inlet sets the level (in dB). Set the level (in dB) The number received in the inlet sets the level (in dB). Store, display, and output a value The word assign, followed by a floating point value, causes that value to be stored and displayed and sent out the live.gain~ object's outlet. If the Parameter Visibility attribute is set to Stored Only, the assign message will not add the new value to the Live application’s undo chain. Restore and output the initial value Restore and output the initial value. Click and drag to change the amplification. Click and drag the slider to change the amplification. Hold down the Command key (Macintosh) or the Control key (Windows) for more precise mouse control. Send the current value out the outlet Sends the current value out the outlet. Set the current value without causing output Sets the current value without causing output. Function depends on inlet In left inlet: The input signal (left channel) to be scaled.

In right inlet: The input signal (right channel) to be scaled. Store a raw normalized value, convert to real, display, and output A raw normalized value (between 0. and 1.) received in the inlet is converted to a real value, stored, displayed by live.gain~ object, and the current value is sent out the outlet. Active mode enable Toggles the object's active mode. When the active attribute is set to 0, mouse action does not cause output and the inactive colors are used. Channels TEXT_HERE Clip size Sets the clipping zone size. Normal Normal (the default) Extended Extended Cold signal color Sets the Cold signal color in RGBA format. Display range (dB) Sets the range, in deciBels, displayed by the live.gain~ object. By default, the the display range is set to the same values as the range of the object itself (-70dB - +6dB). Border color (focus) Sets the display color for the live.gain~ object's border in RGBA format. Warning signal color Sets the Warning signal color in RGBA format. Inactive cold signal color Sets the Cold signal (inactive) color in RGBA format. Inactive warm signal color Sets the Warm signal (inactive) color in RGBA format. Ramp time Sets the ramp time in milliseconds. The default is 10 milliseconds. Refresh interval Sets the update time interval of the meter display, in milliseconds. The minimum update interval is 10 milliseconds, the maximum is 2 seconds. This message also sets the rate at which the live.gain~ object sends out the list of peak values (in dB) for each channel received in that time interval. Live Mode TEXT_HERE Metering Specifies whether the live.gain~ object displays and outputs the signal level pre-fader (0) or post-fader (1). TEXT_HERE TEXT_HERE TEXT_HERE TEXT_HERE Metering display mode The mode attribute allows you to specify metering to be displayed. DeciBel display Set deciBel metering display. Linear display Set linear metering display. Modulation color Sets the modulation color of live.gain~ object in RGBA format. Display orientation Sets the slider object to a horizontal or vertical data display. Vertical display Set the object for vertical display. Horizontal display Set the object for horizontal display. Overload signal color Sets the Overload signal color in RGBA format. Mousing Mode Sets the mode for mouse behavior. Absolute mode The live.gain~ will automatically jump directly to the clicked location. Relative mode The live.gain~ keeps its relative position when you click on it. Moving the mouse outputs higher or lower values in relation to that relative position (the default). Display parameter name Toggles the display of the parameter name. The default is 1 (on). Display parameter value Toggles the display of the gain parameter value. The default is 1 (on). Slider background color Sets the slider background color in RGBA format. Text color Sets the display color for the live.gain~ object's text in RGBA format. Set the redraw threshold for dB display Sets the redraw threshold for dB display. This allows you to balance the redrawing / efficiency. The maximum refresh rate is set by the interval attribute. Set the redraw threshold for linear display Sets the redraw threshold for linear display. This allows you to balance the redrawing / efficiency. The maximum refresh rate is set by the interval attribute. Triangle border color (no focus) Sets the triangle border color in RGBA format. This is only used when the live.gain~ object does not have the focus. Triangle color (no focus) Sets the triangle color in RGBA format. This is only used when the live.gain~ object does not have the focus. Triangle color (focus) Sets the triangle color in RGBA format. This is only used when the live.gain~ object does have the focus. Warm signal color Sets the Warm signal color in RGBA format. Out first and second outlet: The input signal, scaled by the current slider value. Out third outlet: The current slider value in dB, when dragging on the slider with the mouse or when live.gain~ receives an int or float.
Out fourth outlet: When an output is triggered, a raw normalized value (between 0. and 1.) is sent out this outlet. Out fifth outlet: The amplitude of the two channels (in dB) is sent out this outlet.